The DC-300 Duplicating Code Cutting Key Machine is two machines in one. It can both originate and duplicate automotive keys with ease. Code cutting a key is a simple process: insert the depth cam and space key into the machine, slide in the blank and begin cutting. Code cutting can be done in about 30 seconds for a single sided key.

Duplicating a key is even easier; clamp both keys into the vises, turn the machine on and start cutting. Copying a key on the DC-300 takes about 20 seconds.

Features:
• As new code series are introduced, all that is needed is a new space key, in most cases. Occasionally, depending on which depth cams you have with your machine, another depth cam may be required.
• A wire deburring brush is included with the machine. (A nylon brush is also available through Special Orders)
• The DC-300 will hold .0005? accuracy consistently – no need to readjust the machine continually!
• The DC-300 has a double sided vise. It will hold almost all automotive keys without any tipping.
• A pair of brass shims is also included with the machine in the rare case that a key tips.
• The DC9040 cutter supplied with the machine will cut thousands of keys without the need for re-sharpening when used properly. Please note: the cutting wheel on the DC-300 is not designed to cut steel keys. A carbide cutter can be ordered for the machine for steel applications. 

The DC-300 Duplicating and Code Cutting Key Machine comes
with a 1 year warranty against factory defects only. This warranty does not cover the key vices or the cutting wheels.

Accessories: